2020 Kuhn North America 3100 Series 3130 Trailer

2020 Kuhn North America 3100 Series 3130 Trailer

Swipe to View More

  • Year 2020
  • Make Kuhn North America
  • Model 3100 Series
2020 Kuhn North America 3100 Series 3130 Trailer

2020 Kuhn North America 3100 Series 3130 Trailer

2020 Kuhn North America 3100 Series 3130 Trailer

Time-Tested Design

KUHN Knight 3100 Series Reel Auggie® mixers offer the same quality mixing performance and dependable service that has been their hallmark. The time tested, standard reel and auger design provides a fast, thorough mix for a fluffy, palatable ration.

KUHN Knight 3100 Series Reel Auggie® mixers offer the same quality mixing performance and dependable service that has been their hallmark. The time tested, standard reel and auger design provides a fast, thorough mix for a fluffy, palatable ration. Quality components and a rugged design help ensure reliability and long life. These mixers are available in trailer, truck and stationary models with capacities ranging from 150 to 300 ft³. These machines also offer a low standard loading height for easy loading with skid steers.

The Reel Advantage

Gentle, Thorough Mixing

The Reel Auggie® mixer blends by gently lifting and tumbling all feed ingredients. This produces a fluffy, more palatable ration that promotes increased consumption and better herd health.

The gentle tumbling action of the large-diameter reel works together with the two side blending augers to produce end-to-end and side-to-side mixing action. The reel design eliminates much of the force and pressure inherent to most other mixer designs. This results in lower horsepower requirements, reduced machine wear and less feed breakdown.

Consistent Mixing and Discharge

KUHN Knight reel mixers provide a consistent mix, even with small batches, for a balanced ration from beginning to end. Their quick, even discharge with a more complete cleanout helps save time and maximizes efficiency.

Simple Feeding

With a high discharge point, these mixers allow for the use of a simple slide tray in most feeding situations. The long tray makes it easy to feed deeper into most bunks while preventing feed loss from the wind.

PTO

PTO Type Drive: 540 Rpm
PTO Power, Rated Engine Speed 45 kw( 60 hp )

Drivetrain

Drive Control Roller Chain: 60-80-100H

Operational

Operating Speed 7 rpm

Chassis

Hitch/Type Clevis
Sidewalls Thickness - Auger / Reel: 0.3/0.5 ( 9/64"/ 7 GA)
End Plate Thickness Front and Rear: 0.3 cm (9/64")

Dimensions

Overall Height 163 cm (64") | w/Riser Kit: 15 cm (6") | Haypan Up: 56 cm (22") | Haypan Down: 20 cm (8")
Overall Length 541 cm (213")
Length Mixing Chamber: 366 cm (144")
Overall Width Mixer Only: 239 cm (94")
Width Tread: 213 cm (84")
Dimensions 3-Auger Discharge - 24"/36" (61/91 cm) - Maximum Reach: 81/107 cm (32"/42") | Slide Tray - Maximum Reach: 64 cm (25") | Auger Hopper Thickness: 0.8 cm (5/16" ) | Reel Hopper Thickness: 0.8 cm (5/16") |Door Opening Size: 91x51 cm (36"x20" ) | Reel Driveshaft Diameter: 8 cm (3") | Reel Diameter: 152 cm (60") | Upper Auger Drive Shaft Diameter: 5.1 cm (2") | Upper Auger Tube - Outside Diameter:14 cm (5 9/16") | Upper Auger Flighting Thickness: 1 cm (3/8") | Upper Auger Flighting Diameter: 46 cm (18") | Lower Auger Drive Shaft Diameter: 5.1 cm (2") | Lower Auger Tube - Outside Diameter: 14 cm (5 9/16") | Lower Auger Flighting Diameter: 46 cm (18") | Lower Auger Flighting Thickness - Sectional: 1 cm (3/8")
Spindle Diameter 3
Transport Width Slide Tray: 257 cm (101") | 3-Auger Discharge - 24"/36" (61/91 cm): 290/300 cm (114"/118")
Height Slide Tray - Maximum: 64 cm (25") | 3-Auger Discharge - 24"/36" (61/91 cm) - Maximum: 102/117 cm (40"/46")

Capacities

Volume 8.5 m³ (300 ft³)
Features Maximum Net load: 4,082 kg (9,000 lbs)

Weights

Weight Unit: 3,884 kg (8,562 lbs) | Tongue Weight - % Gross: 14

Features

Hub Type 8-Bolt
Features Weighing System: 4- Point

Product Photography