2020 Kuhn North America FB Series 2130 Optifeed

2020 Kuhn North America FB Series 2130 Optifeed

KUHN FB 119 and 2130 fixed chamber balers are the right round balers for the job if you're looking to produce consistent, dense silage bales with impressive speed and efficiency.

KUHN FB 119 and 2130 fixed chamber balers are the right round balers for the job if you're looking to produce consistent, dense silage bales with impressive speed and efficiency.

These balers The FB 119 features an open throat intake system resulting in unrestricted intake for maximum capacity in silage conditions. For greater flexibility, choose between a non-cutting OptiFeed rotor and 14-knife OptiCut cutting rotor on the FB 2130 to best meet your needs. PowerTrack rollers provide greater surface area for maximum compression, resulting in solid bales. To best suit your operation's needs, the KUHN FB 119 and 2130 come equipped with your choice of net or twine binding. Conveniently control each of these balers from the comfort of your tractor seat with the in-cab AT-10 monitor.

Pickup

The newly designed pickup on the FB 2130 gathers the heaviest of windrows even at high forward speeds. The pendulum system and 91" wide intake with height adjustable guide wheels accurately carry the pickup over every ground contour. The pickup roller helps to even out the flow of material into the Integral Rotor, regardless of the crop conditions.

With the open throat design, with 66" pickup, there is no restriction on the crop as it feeds into the baler.

The large diameter rotor on the FB 2130 has heavy-duty auger flighting which is integrated directly onto the outer sections of the rotor.

This system is called Integral Rotor Technology. This maintenance-free and short distance intake system ensures even feeding regardless of variations in the crop. With this system, even the heaviest of crops are force-fed through the intake, resulting in higher forward speeds for outstanding productivity.

Where chopping is not required, the OptiFeed Integral Rotor will feed the crop directly into the bale chamber. The FB 2130 can also be equipped with a cutter, the OptiCut 14. The 14 knives cut the crop to a maximum of 2.75". Each single knife is spring protected against damage. When the obstruction is passed the knife will automatically return to its cutting position.

The intake unit is protected by the main PTO clutch. If a plug occurs the PTO clutch is automatically activated. In addition, the complete cutting floor, including the knives, can be lowered. First the cutting floor will be lowered automatically followed by the knives. After the plug is cleared, the cutting floor, including the knives, can be brought back into the working position. In extreme circumstances KUHN provides double security by rotor disengagement clutch which separates the rotor drive so the bale can be finished.