2020 H & S 8100 Series 18

2020 H & S 8100 Series 18

Features may include:

• 5" x 7" Overhead Mainframe

• Each side opens independently.

• The windrow width on the HDII can be adjusted hydraulically to a maximum of 72".

• One hydraulic remote along with the electrical control box, controls all the functions of the rake.

• Because of the offset of the rake wheel beams, there is no need for center kicker wheels.

• Rake wheel ground pressure can be adjusted by the threaded rod and nut on the end of the lifting pipes on each rake beam.

• The 60" rake wheels on the HDII rake feature UV treated poly wind panels and an over center wheel stop.

• Torsional dampening springs allow the rake wheels to roll smoothly over the terrain.

• The rake wheel lift pipes slide in oil impregnated bronze bushings and also feature a rake wheel lock for transportation.

• The HDII rake features rake beams with a variable adjustment to set the rake wheels straight or in a tilted setting up to 10 degrees. (patented)

• Anti-wrap hay guards are standard equipment.

• The rake wheels may be lifted independently left or right or both at the same time with the master switch.

• An adjustable hitch and jack are standard equipment.