2020 H & S 3100 Series V-Rakes 3110

Information

2020 H & S 3100 Series V-Rakes 3110

Features may include:

  • High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
  • An Adjustable Hitch allows you to level the rake for efficient raking.
  • Right and left side raking is done easily by turning either one of the wing transport valves off.
  • The hitch jack is used to adjust the windrow width as shown.
  • Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
  • The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.

Photos

Highlights

  • Charlottetown, Prince Edward Island
  • 2020
  • H & S
  • 3100 Series V-Rakes 3110
  • Available

Specifications

  • 2020
  • H & S
  • 3100 Series V-Rakes
  • 3110
  • Rakes
  • Transport: (2) – ST205/75D15
  • Rake Wheel Adjustment: Independent wheel flotation with single side adjustment crank
  • Wheel Diameter: 60" | Tooth Diameter: 7.5 mm | Action Cylinder – Raise/Lower: 4 1/2" | Wing Cylinders: 2"
  • In Transport Position: 101"
  • 21'
  • 10' 8"
  • 18' – 22'
  • Adjustment: 3' – 6'
  • 2,000#
  • Teeth Per Wheel: 40
  • Rake Wheel: Tapered Bearings
  • 10
  • 10