2020 H & S 1100 Series Big 26

Information

2020 H & S 1100 Series Big 26

Features may include:

  • PL88C open barrel pintle chain @ 29,900# per strand = 119,600#, w/2" x 1" x 3/16" formed apron channels for apron cross bars.
  • Top Pivot Door w/Air Gate Delay (Truck Mount)
  • Barn Doors w/Air Closure (Truck Mount)
  • Top Pivot Door w/Hydraulic Gate Delay (Chassis Mount)
  • The “BIG DOG” features 1" steel lines to the back of the box and DUAL HYDRAULIC MOTORS. The motors evenly drive each final drive system for more power and less shaft stress than a single motor system.
  • The drive shaft features MD nylon reversible style bearings.
  • 16 Gauge Stainless Steel Sides.
  • Large 17" x 28" front window for viewing when unloading.
  • The idler apron shaft assembly features 6 tooth machined steel sprockets with bronze idler bushings.
  • Apron tension adjustment is made by tightening the 4 spring loaded tightener bolts on the front of the box. The spring loaded tighteners maintain tension on the apron during start up and operation.
  • Spring Loaded Main Apron Tighteners.
  • LED Lighting and Door Locks.

Photos

Highlights

  • Charlottetown, Prince Edward Island
  • 2020
  • H & S
  • 1100 Series Big 26
  • Available
  • Inside: 98"
  • Inside: 86"

Specifications

  • 2020
  • H & S
  • 1100 Series Big
  • 26
  • Forage Boxes & Blowers
  • Dual Hydraulic Motors | Final: Dual Final Drive w/ Oil Bath and Spring Loaded Tightener
  • Main Apron Chain & Slats: 2" x 1" x 3/16" Formed Apron Channels | Rear Drive Shaft: 2¼" | Front Idler Shaft: 1¾" | Uprights: 2" x 2" x 3/16" on 16" Centers | Front Window: 17" x 28"
  • Inside: 86"
  • Inside: 26'
  • Inside: 98"
  • 27' 7"
  • 102"
  • 1477 cu. ft.
  • LED
  • Unload Time: Dependent on Tractor Hydraulic System & GPMs | Rear Door Latching: Automatic
  • Apron & Slats: PL88C Open Barrel Pintle
  • Rear Drive Shaft: 1045 Steel | Front Idler Shaft: 1045 Steel | Uprights: Tubular Steel | Wall: Stainless Steel | Floor: Virgin Grade Poly