Good Equipment

  • 73 Capital Drive
  • Charlottetown, PE C1E 1E8
  • Call Us: (902) 892-4188
  • https://www.goodequipmentltd.com/
Print This Page

2020 H & S 5200 Series 5217

Information

2020 H & S 5200 Series 5217

Features may include:

  • The 5200 Series Forage Boxes are front unload only.
  • Available in either HD 7-4 (cross conveyor), or HD Twin Auger front unload systems.
  • PTO front unload drive as standard
  • Faster unload time and the smoothest unloading system on the market
  • New swept back unit design
  • H&S uses (3) – 18" 4 Bar Heavy Duty spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding.
  • Beater shafts are 1¼" & equipped with greaseable bearings and are mounted in the head, not auxiliary panels in the box.
  • Full length side screen venting
  • Easy install 4th beater w/knock-out lugs
  • A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity.
  • A separate clutch allows you to start and clear the cross conveyor or augers before you start the beaters or main apron conveyors.
  • Heavy 10" frame stringers
  • 5” – 6 Gauge Steel Channel Cross-Frame Members
  • 2.5" x 2.5" tube uprights
  • 22 Apron Drive Shaft
  • 7+4 Models – Standard Spring Assist 24" Cross Conveyor Extension has the ability to tip DOWNWARD 22 degrees
  • Spring loaded tighteners for the beater drive chains
  • Remote grease zerks for the beater bearings
  • All models feature a Removable Roof/No Roof Option

Photos

Highlights

  • Charlottetown, Prince Edward Island
  • 2020
  • H & S
  • 5200 Series 5217
  • Available
  • Inside: 88.25"
  • Inside (floor to roof center): 99"

Specifications

  • 2020
  • H & S
  • 5200 Series
  • 5217
  • Forage Boxes & Blowers
  • 540
  • Bronze Worm Gear Box — #80 Roller Chain
  • HD 7-4 Cross-Conveyor: 22" Wide | HD 7-4 Cross-Conveyor Extension: 24" | Twin Auger Discharge: (2) 10″ High Speed Cross Augers w/Poly-Lined Auger Troughs & 11″ Slide-Out Extension | Beaters: 3 – 18" | Main Apron Drive Shaft: 2" | Main Stringers: 10" | Box Uprights: 2.5" x 2.5"
  • Inside (floor to roof center): 99"
  • Inside: 17'
  • Inside: 88.25"
  • 120"
  • 20' 8"
  • 112"
  • No Roof/Struck: 858.48 cu. ft.
  • Beaters: 4 Bar Spiral | Main Apron Speed: Variable Speed Drive — 12 Unload Speeds | Roof: Removable Roof is Standard
  • Apron: 667X
  • HD 7-4 Cross: CA550 Chain w/Welded Slats | HD 7-4 Cross Extension: Spring Assist/Hydraulic Extend
  • Box Uprights: Tubular Steel | Box Sides & Rear: Aluminized
  • Main Stringers: 7 Channel seton 42" Spacing