Good Equipment

Information

2020 Dion Ag S55 Series S55

From the intake to the rotor, the S55 blower moves silage with efficiency and capacity.

Features may include:

• Paired with high torque rating PTO shaft, the clutch protects the blower drive components and the tractor from variations in the load.

• The 60in rotor contains 8 paddles providing a smooth operation and large flow. Made of heat-treated steel, they resist abrasion.

• The feeding auger is driven by 2 pair of 5VX belts (cogged belts) capable of transmitting all the required power. The large 2in diameter auger shaft is supported by premium quality cast iron flange bearings.

• Independent cylinders lift both wheels without effort. Travels and installation at the silo are faster. The conical wheel bearings are durable.

• The rotor capacity means nothing if it’s not fed properly. Dion forage blowers offer an oversized intake table capable or accepting high throughputs without bridging or clogging.

• The auger engagement system is simple and a safe.

• Hinged guards provide easy access for maintenance and adjustments

• PTO shearbolts are stored on the driveshaft guard for handy access

• Two water intakes are standard equipment on the S55 blowers. They provide lubrication to the rotor band to prevent debris adhesion, accumulation and also reduce power requirement and wear.